Del Valle, TX

Upon my arrival in Del Valle I performed a cooling evaluation on 2 furnace systems, found that bother blower motors have oil coming out the air movement system , the downstairs system is much worse than the upstairs. System is showing sign of loss of air flow, I recommend replacing this part. Left system operating. I’m still waiting on part availability.

Upon my arrival in Del Valle, I found that the pressures are high indicating towards a restriction, found that the heat transfer media system is still pretty dirty, customer did try to clean some of it up since the last time we were out here. I also found that the thermostat was turning on the auxiliary heat strips which would cause the A/C system to not cool as well. I disconnected the emergency heat for now. Customer wants quotes for the cleaning and the thermal replacement and will consider it later down the road.

Upon my arrival in Del Valle, I tested the A/C system and found everything operating properly at this time. I went through the wires and made sure there weren’t any bare spots or loose connections. I checked the voltage enhancement system and pressures. Can’t find any issues with the system at this time. Let the system run for 30 minutes. It is possible that when she is as messing with the thermostat to bring the temp down that the system accidentally short cycled and shut down on a safety.

WO-TNFR277852 upon my arrival in Del Valle, I performed a A/C cooling evaluation found that the performance enhancement system from repair hn13E from 2022 had failed replaced part under warranty. Checked system operations and found it to be working properly. recommend to customer installing a water safety device on the system and talked to her about the reme halo. She did not make a choose today.

Performed heating evaluations on both gas furnace systems. All components functioning properly at this time.

Upon my arrival to Del Valle, Tx. I performed diagnostic on ac system. Found main refrigerant pumping station grounded. Client is trying to find information on installer. Rheem won’t warranty the parts unless the home owner can provide information on the installer to make sure he was licensed. Will wait on client to send estimates on repairs.

upon my arrival to del valle, tx., I found that the indoor ac system was extremely dirty and the system appeared to be over charged because it has a high head pressure and subcooling. I increased the airflow to get a little more airflow across the coil. I recommend a pull and clean on the system and while we do that we recover the refrigerant in the system and weight it back in. The client can’t do the repair right now but will call us if he has more issues.

WO-TNFR162439 upon my arrival to del valle, tx., i found that the voltage enhancement system was reading low, this could cause the breaker to trip but also found that the system calls for a 40 amp breaker and customer only has a 20 amp breaker. Did repairs voltage enhancement system and the amps did go down customer choose HN13A. Left ac unit running.

upon my arrival to del valle, tx., I found that the main system is low on r-22 which is phased out. The ac system is approximately 30 years old and in rough condition I recommend a full system replacement. I gave the client a quote for full ac system replacement and they will let us know if they want to move forward.

Upon my arrival in Del Valle, Tx., I cleaned the heat transfer media coil, checked operations after and found ac unit to be working properly at this time.

Upon my arrival in Del Valle, Tx., I performed a cooling evaluation on the ac unit and found that indoor heat transfer media coil is dirty and need to be cleaned. Customer choose option HK2A and comfort 1 Agreement. Left equipment on at this time. uploaded pictures of the filter on the coil they need to be sent to daughter.

I performed the fall inspection and the heat pump is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump system is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump system is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump system is operating at manufacturer specifications at this time.

I performed the fall inspection and the heat pump system is operating at manufacturer specifications at this time.

Arrived for the AC system repair service in Del Valle Tx. I performed cooling evaluation on both air conditioning system in del vale, Texas. One system is r22 but is actually operating pretty well. The other system is 11 years old and has a slight restriction in metering device. The owner also said they have low air flow in a few room so I inspected ducts and it seems like they need a bigger plenum due to having the short runs on the end cap and the longer runs have low air flow. The client wants to wait on replacing at the time but will follow up with us when he is ready.

Arrived for the AC system repair service. I found the drain completely clogged up, spoke to the client about his options and he went with HF15A repair at this time.

Arrived for the AC system repair service. I found the drain completely clogged up, spoke to the client about his options and he went with HF15A repair at this time.

Arrived for the AC system repair service. I found the drain completely clogged up, spoke to the client about his options and he went with HF15A repair at this time.

Arrived for the AC system repair service. I found the drain completely clogged up, spoke to the client about his options and he went with HF15A repair at this time.

Arrived for the AC system repair in Del Valle Tx. I was aware the air conditioning system was not operating properly a few days ago. When I arrived I found the pressure good and a 17 degree split between the coil. The temp was 80 due to the system being off and was 74 when I left. I explained to the client it is operating properly at this time and she agreed.